@database doc/VMM_Rexx.guide
@Width 72
@Node Main "doc/VMM_Rexx.guide"
This  document  describes  VMM's  ARexx  functions.   VMM  supports 18
functions  for use in ARexx scripts.  Each function is listed with its
parameters and the results it can produce.
Supported commands:
  @{"ADD_PROG   "   Link "Add_Prog"}
  @{"DISABLE    "   Link "Disable"}
  @{"ENABLE     "   Link "Enable"}
  @{"HELP       "   Link "Help"}
  @{"HIDE       "   Link "Hide"}
  @{"INFO       "   Link "Info"}
  @{"MEM        "   Link "Mem"}
  @{"MEMTRACK   "   Link "MemTrack"}
  @{"MEMTYPE    "   Link "MemType"}
  @{"MINVMALLOC "   Link "MinVMAlloc"}
  @{"PATCHWB    "   Link "PatchWB"}
  @{"REM_PROG   "   Link "Rem_Prog"}
  @{"SHOW       "   Link "Show"}
  @{"STAT       "   Link "Stat"}
  @{"VMPRIORITY "   Link "VMPriority"}
  @{"WRITEBUFFER"   Link "WriteBuffer"}
  @{"QUIT       "   Link "Quit"}
  @{"ZOOM       "   Link "Zoom"}
The  return codes used by those commands are the same as those used by
the standard MUI ARexx-Interface.  These are:
  -2     Not enough memory to carry out command
  -3     Unknown ARexx command
  -4     Syntax error in command's parameters
@EndNode
@Node Add_Prog "doc/VMM_Rexx.guide"
Command: ADD_PROG "task name" <MinPublic> <MinNonPublic> "ON" | "OFF"
The ADD_PROG command adds a task to VMM's task list with the specified
settings.  The MinPublic and MinNonPublic parameters correspond to the
advanced  options  section  in VMM's GUI.
If  you like to specify "Use VM", set MinPublic to -1 and MinNonPublic
to  0;  if you like to specify "Don't use VM", set MinPublic to -1 and
MinNonPublic to -1.
ON  or  OFF  determines the type of code paging used for the specified
program.
@EndNode
@Node Disable "doc/VMM_Rexx.guide"
Command: DISABLE
The  command disables allocation of virtual memory until it is enabled
again  using  either  the  corresponding  ARexx  command or the enable
hotkey.
@EndNode
@Node Enable "doc/VMM_Rexx.guide"
Command: ENABLE
The  command enables allocation of virtual memory until it is disabled
by invoking the hotkey or specifying the Arexx command DISABLE.
@EndNode
@Node Help "doc/VMM_Rexx.guide"
Command: HELP "file"
This  command  prints  a  list  of  all  available  ARexx  commands to
"filename".   The  filename  specified  should  contain  a  full path,
otherwise the file may be written into a directory you don't expect.
@EndNode
@Node Hide "doc/VMM_Rexx.guide"
Command: HIDE
This command causes VMM to hide its user interface.
@EndNode
@Node Info "doc/VMM_Rexx.guide"
Command: INFO "title" | "author" | "copyright" | "description" | 
              "version" | "base" | "screen"
This  is  a standard MUI Arexx command.  Depending on the argument the
result string will be filled with the following information:
           "title"            Name of the program (VMM)
           "author"           Author of the program
           "copyright"        Copyright status
           "description"      A short description of the program
           "version"          version string
           "base"             Name of the ARexx-port
           "screen"           Name of the public-screen used (NULL)
@EndNode
@Node Mem "doc/VMM_Rexx.guide"
Command: MEM ("FIXED" <size>) | "DYNAMIC" | ("RESTRICTED" <min> <max>)
This  command  changes  the  way  and/or the amount of physical memory
dedicated to virtual memory.
size,  min  and  max  are  specified  in  bytes.  These values will be
rounded to multiples of the current pagesize automatically.  If either
of these values is too small it will be adjusted.
@EndNode
@Node MemTrack "doc/VMM_Rexx.guide"
Command: MEMTRACK "ON" | "OFF"
This command enables or disables memory tracking.
@EndNode
@Node MemType "doc/VMM_Rexx.guide"
Command: MEMTYPE "FAST" | "CHIP" | "ANY"
This  command specifies the type of memory used for paging.  This only
influences page frames allocated after this command has executed.
@EndNode
@Node MinVMAlloc "doc/VMM_Rexx.guide"
Command: MINVMALLOC <num_bytes>
This  command  specifies  the  minimum request size to go into virtual
memory.   Requests  smaller  than  this  value will be put into public
memory.
@EndNode
@Node PatchWB "doc/VMM_Rexx.guide"
Command: PATCHWB "ON" | "OFF"
This  command  specifies  whether  to  patch  Workbench to display the
amount of free virtual memory in its titlebar.
@EndNode
@Node Rem_Prog "doc/VMM_Rexx.guide"
Command: REM_PROG "taskname"
This command removes the specified task from VMM's task list.  If this
program isn't found in the list nothing will be done.
@EndNode
@Node Show "doc/VMM_Rexx.guide"
Command: SHOW
This command causes VMM to display its user interface.
@EndNode
@Node Stat "doc/VMM_Rexx.guide"
Command: STAT "ON" | "OFF"
This command causes the statistics window to be turned on or off.
@EndNode
@Node VMPriority "doc/VMM_Rexx.guide"
Command: VMPRIORITY <prio>
This  command  causes  the  priority of virtual memory to be adjusted.
This  can  influence  whether  virtual  or  physical memory is used up
first.
@EndNode
@Node WriteBuffer "doc/VMM_Rexx.guide"
Command: WRITEBUFFER <size>
This  command specifies the size of the write buffer used to write out
pages to disk.  It will be automatically rounded down to a multiple of
the current page size.
@EndNode
@Node Quit "doc/VMM_Rexx.guide"
Command: QUIT
This  causes  VMM  to  quit if possible.  If there is too much virtual
memory  allocated,  so  it  does not fit into physical memory, VMM may
refuse to quit.
@EndNode
@Node Zoom "doc/VMM_Rexx.guide"
Command: ZOOM "ON" | "OFF"
This  command  causes  the zoomed state of the statistics window to be
changed.   If  the statistics window is not currently opened the state
will  be saved for later usage.  Thus opening the statistics window in
zoomed state should first use ZOOM ON and then STAT ON.
@EndNode